LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2013 >> Sierra 1500 XFE >> Repair and Diagnosis >> External Pages >> Different car >> Section 2721 (Object Detection System And Pedestrian Protection System) >> Repair Instructions >> Front Parking Assist Alarm Sensor Replacement (Center) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 GMC Sierra 3500 HD, 2016 GMC Sierra 2500 HD, 2016 GMC Sierra 1500, 2016 Chevrolet Silverado 3500 HD, and 2016 Chevrolet Silverado 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE:

    Do not refinish previously painted sensors. Excess paint build up will cause the sensor to be inoperative.

  1. Paint the front object alarm sensor. Refer to Basecoat/Clearcoat Paint Systems .
  2. Ensure the paint does not exceed 6 mils. Use a paint thickness gauge suitable for non-ferrous metals. Refer to Paint Gauges .
    3. Fig 1: Identifying Rear Object Sensor Housing
    GM1699865Courtesy of GENERAL MOTORS COMPANY
  3. Insert the sensor into the housing.
  4. Connect the electrical connector to the front object alarm sensor.
scientia non olet · About LEMON Manuals