LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2013 >> Sierra 1500 XFE >> Repair and Diagnosis >> External Pages >> Different car >> Section 2535 (Object Detection And Pedestrian Protection System) >> Diagnostic Information and Procedures >> Forward Collision Alert System Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 GMC Sierra 3500 HD, 2015 GMC Sierra 2500 HD, 2015 GMC Sierra 1500, 2015 Chevrolet Silverado 3500 HD, and 2015 Chevrolet Silverado 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify the scan tool Forward Collision Alert Function Status parameter is not Malfunction.
    • If the parameter is Malfunction 

      Refer to Circuit/System Testing - Frontview Camera Module Malfunction

    • If parameter is not Malfunction 
  3. Verify the forward collision alert indicators turn on and off when commanding the instrument cluster All Indicators On and Off with a scan tool.
    • If the indicators do not illuminate 

      Refer to Circuit/System Testing - Forward Collision Alert Indicator Malfunction

    • If the indicators illuminate 
  4. Verify the forward collision alert distance on the driver information center toggles between far, medium, near and off when cycling the forward collision alert distance switch.
    • If the setting does not change 

      Test or replace the S70L Steering Wheel Controls Switch - Left.

    • If the setting changes 
  5. Verify the area of the K109 Frontview Camera Module is not contaminated.
    • If contaminated 

      Clean the windshield

    • If not contaminated 
  6. All OK.
scientia non olet · About LEMON Manuals