LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2013 >> Sierra 1500 XFE >> Repair and Diagnosis >> External Pages >> Different car >> Section 2535 (Object Detection And Pedestrian Protection System) >> Diagnostic Information and Procedures >> DTC B1008: Calibration Data Not Programmed >> Circuit/System Verification

Circuit/System Verification

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 GMC Sierra 3500 HD, 2015 GMC Sierra 2500 HD, 2015 GMC Sierra 1500, 2015 Chevrolet Silverado 3500 HD, and 2015 Chevrolet Silverado 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE:

    Do not diagnose this DTC if set in history

  1. Ignition ON.
  2. Verify that DTC B101E 42 is not set.
    • If the DTC is not set 
  3. Verify that DTC B1008 is not set.
    • If DTC is set 
    1. Calibrate the front camera module. Refer to Front View Camera Module Calibration .
    2. Verify the DTC does not set.
      • If the DTC sets, replace the frontview camera module.
      • If the DTC does not set
    3. All OK.
    • If the DTC is not set 
  4. All OK.
scientia non olet · About LEMON Manuals