LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2013 >> Sierra 1500 XFE >> Repair and Diagnosis >> External Pages >> Different car >> Section 1904 (Wiring Systems And Power Management - Component Connector End Views - Seat Adjuster Motor Assembly - Driver (Ag1 Without An3) To Sliding Rear Window Open Relay (A48)) >> Component Connector End Views >> Seat Back Ventilation Heating and Cooling Module - Driver (KB6) Connector End View

Seat Back Ventilation Heating and Cooling Module - Driver (KB6) Connector End View

WARNING: This page is about a different car, the 2011 GMC Sierra, 2011 GMC Cab & Chassis Sierra, 2011 Chevrolet Silverado, and 2011 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Seat Back Ventilation Heating and Cooling Module - Driver (KB6) Connector End View
GM1554145Courtesy of GENERAL MOTORS CORP.
Seat Back Ventilation Heating and Cooling Module - Driver (KB6)

Pin Wire Circuit Function
1 1 BN 6193 Driver Seat Back Heated/Cool Ventilation Module Heat Control
2 0.35 D-GN 5918 Driver Seat Blower Voltage Reference
3 1 OG 6194 Driver Seat Back Heated/Cool Ventilation Module Cool Control
4 0.35 GY 5912 Low Reference
5 0.35 D-BU 2425 Driver Seat Back Temperature Sensor Signal
6 - - Not Used
7 0.35 TN 7010 Driver Seat Back Blower Speed Control
8 0.35 PK 2426 Low Reference
Connector Part Information 
  • Harness: Driver Seat
  • OEM: E3575-001
  • Service: Service by Harness - See Part Catalog
  • Description: 8-Way F 1.5 mm Unsealed (BK)
Terminal Part Information 
  • Pin:1, 3
  • Terminal/Tray: 7116-4101-08/9
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 12094430/J-35616-2A (GY)
  • Pin:2, 4, 5, 7, 8
  • Terminal/Tray: 7116-4100-08/9
  • Core/Insulation Crimp: E/C
  • Release Tool/Test Probe: 12094430/J-35616-2A (GY)
scientia non olet · About LEMON Manuals