Parking Assist Control Module Replacement

WARNING: This page is about a different car, the 2011 GMC Sierra, 2011 GMC Cab & Chassis Sierra, 2011 Chevrolet Silverado, and 2011 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Object Alarm Module & Nuts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front passenger bucket seat. Refer to Front Seat Replacement - Bucket .
1	Rear Object Alarm Module Nut (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten: 9 N.m (80 lb in)
2	Rear Object Alarm Module Assembly Procedure Position carpet in order to access module. Disconnect electrical connector. Reprogram the module after replacement. Refer to Control Module References

Callout

Component Name

Preliminary Procedure:
Remove the front passenger bucket seat. Refer to Front Seat Replacement - Bucket .

Rear Object Alarm Module Nut (Qty: 3)

CAUTION: Refer to Fastener Caution .

Tighten: 9 N.m (80 lb in)

Rear Object Alarm Module Assembly

Procedure

Position carpet in order to access module.
Disconnect electrical connector.
Reprogram the module after replacement. Refer to Control Module References