LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2013 >> Sierra 1500 XFE >> Repair and Diagnosis >> Body & Frame >> Windows >> Fixed And MOVEABLE Window System >> Repair Instructions >> Rear Window Replacement >> Installation Procedure

Installation Procedure

  1. Install a stationary window into the opening. Refer to Adhesive Installation of Stationary Windows (Windshield) , Adhesive Installation of Stationary Windows (Rear Window) .
  2. Install the rear sliding window regulator, if equipped. Refer to Rear Sliding Window Regulator Replacement .
  3. Install the window lower garnish molding. Refer to Rear Window Lower Garnish Molding Replacement (Regular Cab) , Rear Window Lower Garnish Molding Replacement (Ext Cab/Crew Cab w/A48) , Rear Window Lower Garnish Molding Replacement (Ext Cab/Crew Cab w/o A48) .
  4. Install both rear seat headrests (extended cab). Refer to Head Restraint Replacement .
  5. Remove the rear seat (extended cab) only. Refer to Rear Seat Removal and Installation (Extended Cab with AM7) , Rear Seat Removal and Installation (Heavy Duty Crew Cab with A68) , Rear Seat Removal and Installation (Light Duty Crew Cab with A68) , Rear Seat Removal and Installation (Extended Cab with A68) .
  6. Remove the rear sliding window regulator motor bolt , if equipped. Refer to Rear Sliding Window Regulator Replacement .
  7. Remove the double layer of masking tape around the perimeter of the painted surfaces and interior trim.
scientia non olet · About LEMON Manuals