LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2012 >> Cutaway 6.6L Eng VIN L >> Repair and Diagnosis >> External Pages >> Different car >> Section 344 (Disc Brake System) >> Repair Instructions >> Front Brake Shield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 GMC Savana, 2013 GMC RV Cutaway, 2013 GMC Cutaway, 2013 Chevrolet RV Cutaway, and 2013 Chevrolet Express. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Exploded View Of Disc Brake Components (15 Series)
    GM913491Courtesy of GENERAL MOTORS COMPANY
  1. Install the splash shield (6), for 15 series.
    2. Fig 2: Splash Shield (25/35 Series)
    GM371077Courtesy of GENERAL MOTORS COMPANY
  2. Install the splash shield, for 25/35 series.
  3. Install the hub and bearing assembly (5). Refer to Front Wheel Hub, Bearing, and Seal Replacement (4WD) , Front Wheel Hub, Bearing, and Seal Replacement (RWD) .
  4. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (6-Lug Wheel) , Tire and Wheel Removal and Installation (8-Lug Wheel) .
  5. Remove the safety stands.
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals