Installation Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 GMC Savana, 2013 GMC RV Cutaway, 2013 GMC Cutaway, 2013 Chevrolet RV Cutaway, and 2013 Chevrolet Express. However, it is still accessible from the selected car via links, so may be relevant.
- Install the bulb (4) to the socket.
- Push in on the bulb (4) and turn 1/4 turn clockwise.
- Install the bulb (4) and socket into the rubber grommet in the headlamp capsule (1).
- Install the headlamp capsule (1) to the headlamp housing.
- Install the retaining ring to the headlamp housing assembly.
- Install the screws to the retaining ring to the headlamp housing assembly and tighten to 1.5 N.m (13 lb in).
CAUTION:
Refer to Fastener Caution .