LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2012 >> Cutaway 4.8L Eng VIN A >> Repair and Diagnosis >> External Pages >> Different car >> Section 320 (Data Communication System) >> Repair Instructions >> Body Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 GMC Savana, 2013 GMC RV Cutaway, 2013 GMC Cutaway, 2013 Chevrolet RV Cutaway, and 2013 Chevrolet Express. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Right Side Knee Bolster Trim Panel
GM853308Courtesy of GENERAL MOTORS COMPANY
  1. Remove the right side knee bolster trim panel. Refer to Passenger Knee Bolster Replacement .
    Fig 2: Electrical Connectors And Body Control Module
    GM923655Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the electrical connectors (2) from the body control module (BCM) (1).
    Fig 3: Identifying BCM Retaining Tabs & Bracket
    GM923653Courtesy of GENERAL MOTORS COMPANY
  3. Release the tabs (2) retaining the BCM (1) to the bracket.
  4. Remove the BCM (1) from the vehicle.