LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2012 >> Cutaway 4.8L Eng VIN A >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 4.8L, 5.3L, 6.0L - Repair Instructions >> Repair Instructions >> Fuel Pump Flow Control Module Replacement >> Removal Procedure

Removal Procedure

  1. Fig 1: View Of Chassis Wiring Harness Electrical Connector & Fuel Pump Flow Control Module
    GM1931044Courtesy of GENERAL MOTORS COMPANY

    Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the chassis wiring harness electrical connector (2) from the fuel pump flow control module (1).
    3. Fig 2: View Of Fuel Pump Flow Control Module & Bolts
    GM1931045Courtesy of GENERAL MOTORS COMPANY
  3. Remove the fuel pump flow control module bolts (1).
  4. Remove the fuel pump flow control module (2) from the frame.
scientia non olet · About LEMON Manuals