LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2012 >> Acadia SLE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 (Engine Exhaust System) >> Repair Instructions >> Exhaust Manifold Lower Heat Shield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Exhaust Manifold Lower Heat Shield Bolts
    GM1839760Courtesy of GENERAL MOTORS COMPANY
  1. Position the exhaust manifold lower heat shield to the engine.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the exhaust manifold lower heat shield bolts (1, 2). Tighten bolt (1) to 10 N.m (89 lb in) and tighten bolt (2) to 50 N.m (37 lb ft).
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals