Accessory Switch Replacement

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Accessory Switch

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front floor console trim plate. Refer to Front Floor Console Trim Plate Replacement
1	Accessory Switch Screws (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten: 2 N.m (18 lb in)
2	Accessory Switch Bezel
3	Accessory Switch Disconnect electrical connector. Depressing four tabs, remove switch forward of bezel.