Removal Procedure

Fig 1: ECBM Shield, Retainers And Bolts

Courtesy of GENERAL MOTORS CORP.

Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the electronic brake control module (EBCM) shield retainers (2).
Remove the EBCM shield bolts (3) and shield (1).

Fig 2: Chassis Wiring Harness Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the chassis wiring harness electrical connector (1) from the fuel pump flow control module.

Fig 3: Fuel Pump Flow Control Module And Bolts

Courtesy of GENERAL MOTORS CORP.

Loosen the fuel pump flow control module bolts (1).
Slide the fuel pump flow control module (2) towards the passenger side of the vehicle.
Remove the fuel pump flow control module from the vehicle.