Fuel Feed Intermediate Pipe Replacement

Preliminary Procedures

1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief .
2. Remove the Intake manifold cover. Refer to Intake Manifold Cover Replacement .
3. Remove the fuel pipe shield. Refer to Fuel Pipe Shield Replacement .

Tighten: 

1. Tighten the fittings in sequence (1, 2, 3).
2. First Pass 15 N.m(11 lb ft)
3. Second Pass 30 N.m(22 lb ft)

Procedure

1. Discard the pipe when removed and install a NEW pipe.
2. Lubricate the pipes with silicon free engine oil. Refer to Adhesives, Fluids, Lubricants, and Sealers .
3. Pressure up the fuel system and check for leaks.