LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Terrain SLT, 2.4 C, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (Disc Brake System) >> Repair Instructions >> Front Brake Rotor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Terrain and 2010 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the J-42450-A:  Wheel Hub Resurfacing Kit, thoroughly clean any rust or corrosion from the mating surface of the hub/axle flange.
  2. Using the J-41013:  Rotor Resurfacing Kit, thoroughly clean any rust or corrosion from the mating surface of the rotor to the hub/axle flange.
    3. Fig 1: Brake Rotor Bolt
    GM1873960Courtesy of GENERAL MOTORS CORP.
  3. Install the brake rotor.
    4. CAUTION: Refer to Fastener Caution .
  4. Install the brake rotor bolt (1) and tighten to 9 N.m (80 lb in).
  5. Position the brake caliper and bracket assembly to the vehicle.
    6. Fig 2: Brake Caliper Bracket Bolts
    GM1873958Courtesy of GENERAL MOTORS CORP.
  6. Install the brake caliper bracket bolts (1) and tighten to 190 N.m (140 lb ft).
  7. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  8. Burnish the brake pads and rotors. Refer to Brake Pad and Rotor Burnishing .
scientia non olet · About LEMON Manuals