K9 Body Control Module X6 Connector End View
Courtesy of GENERAL MOTORS CORP. K9 Body Control Module X6
| Pin |
Wire |
Circuit |
Function |
| 1 |
0.8 GY |
5911 |
Driver Door Lock Motor Lock Control |
| 2 |
2 TN |
294 |
Door Lock Actuator Unlock Control |
| 3 |
2 BK |
750 |
Ground |
| 4 |
1 D-GN |
3271 |
Door Latch Control |
| 5 |
0.35 PK/BK |
1303 |
Liftgate Ajar Switch Signal (TB4) |
| 6-8 |
- |
- |
Not Used |
| 9 |
0.35 D-BU |
6133 |
Local Interconnect Network 2 |
| 10 |
0.35 D-GN |
6134 |
Local Interconnect Network 3 |
| 11 |
- |
- |
Not Used |
| 12 |
0.5 L-BU |
1134 |
Park Brake Switch Signal |
| 13-14 |
- |
- |
Not Used |
| 15 |
0.35 GY |
5797 |
Liftgate Open/Close Switch Signal - Rear (TB4) |
| 16 |
0.35 BN |
6132 |
Local Interconnect Network 1 (CF5) |
| 17-23 |
- |
- |
Not Used |
| 24 |
0.35 TN/BK |
2500 |
High Speed GMLAN Serial Data Bus + |
| 25 |
0.35 TN |
2501 |
High Speed GMLAN Serial Data Bus - |
| 26-27 |
- |
- |
Not Used |
Connector Part Information
- Harness Type: Body
- OEM Connector: HIT2PB-27-F-PK
- Service Connector: 19151267
- Description: 27-Way F 0.64 2.8 Series (PK)
|
Terminal Part Information
- Pins: 1-4
- Terminated Lead: Pins: 1, 4 - 13327199
- Terminated Lead: Pin 2, 3 - 13575873
- Release Tool: J-38125-12A
- Diagnostic Test Probe: J-35616-35 (VT)
- Terminal/Tray: SNAC-A061T-M2.8/20
- Core/Insulation Crimp: Pin 1 - E/A
- Core/Insulation Crimp: Pin 2, 3 - A/D
- Core/Insulation Crimp: Pin 4 - C/A
- Pins: 5, 9, 10, 12, 15, 16, 24, 25
- Terminated Lead: 13575870
- Release Tool: J-38125-12A
- Diagnostic Test Probe: J-35616-64B (L-BU)
- Terminal/Tray: SNAC3-A021T-M0.64/20
- Core/Insulation Crimp: J/J
|