K9 Body Control Module X4 Connector End View

Fig 1: K9 Body Control Module X4 Connector End View

Courtesy of GENERAL MOTORS CORP.

K9 Body Control Module X4

Pin	Wire	Circuit	Function
1	1 TN/WH	312	Right Headlamp Low Beam Supply Voltage
2	0.8 YE	712	Left Headlamp Low Beam Supply Voltage
3	0.5 D-BU/WH	1315	Right Front Turn Signal Lamp Supply Voltage
	0.35 D-BU/WH	1315	Right Front Turn Signal Lamp Supply Voltage
4	0.5 D-GN/WH	1335	Right Rear Turn Signal Lamp Supply Voltage
	0.35 D-GN/WH	1335	Right Rear Turn Signal Lamp Supply Voltage
5	0.5 BN/WH	309	Right Park Lamp Supply Voltage
6	0.5 PU	709	Left Park Lamp Supply Voltage
7	0.5 BN	2509	Left Rear Park Lamps Supply Voltage
8	0.35 D-GN	5706	5-Volt Reference (TB4)
9	0.35 YE	7546	Logisitics Relay Control (EXP)
10	0.35 YE	5420	Rear Wiper Relay Control
11	0.35 WH	5065	Center High Mounted Stop Lamp (CHMSL) Control
12	0.5 PK	70	RAP Relay Switch Supply Voltage
13	0.35 D-GN/RD	6846	Rear License Lamp Control
14	0.35 OG	2268	Washer Fluid Pump Relay Control
15	0.35 YE	5199	Ignition Voltage
16	0.35 GY	91	Wiper Relay Control
17	0.5 YE	196	Windshield Wiper Motor Park Switch Signal
18	0.5 WH	5075	Current Sensor Signal
19	-	-	Not Used
20	0.5 RD/WH	2340	Battery Positive Voltage
21	0.5 PK	5076	Current Sensor Voltage
22	0.5 D-BU	5985	Serial Data Wake-Up Signal
23	0.35 L-BU	5986	Serial Data Communication Enable
24	0.35 PK/BK	109	Hood Ajar Switch Signal (BTV)
25	-	-	Not Used
26	0.5 BK	50	Ground

Connector Part Information  Harness Type: Body OEM Connector: HIT2PB-26-D-K Service Connector: 19151263 Description: 26-Way F 0.64 2.8 Series (BK)

Terminal Part Information  Pins: 5-18, 20-24, 26 Terminated Lead: 13575870 Release Tool: J-38125-12A Diagnostic Test Probe: J-35616-64B (L-BU) Terminal/Tray: SNAC3-A021T-M0.64/20 Core/Insulation Crimp: J/J Pins: 1-4 Terminated Lead: 13327199 Release Tool: J-38125-12A Diagnostic Test Probe: J-35616-35 (VT) Terminal/Tray: SNAC-A061T-M2.8/20 Core/Insulation Crimp: Pins 1, 3 - C/A Core/Insulation Crimp: Pins 2, 4 - E/A