K17 Electronic Brake Control Module Connector End View

Fig 1: K17 Electronic Brake Control Module Connector End View

Courtesy of GENERAL MOTORS CORP.

K17 Electronic Brake Control Module

Pin	Wire	Circuit	Function
1	3 RD/BK	442	Battery Positive Voltage
2	-	-	Not Used
3	0.35 D-GN/WH	817	Vehicle Speed Signal
4-7	-	-	Not Used
8	0.35 L-BU	5986	Serial Data Communication Enable
9-10	-	-	Not Used
11	0.35 TN/BK	2500	High Speed GMLAN Serial Data Bus +
12	0.35 TN/BK	2500	High Speed GMLAN Serial Data Bus +
13	0.35 TN	2501	High Speed GMLAN Serial Data Bus -
14	0.35 TN	2501	High Speed GMLAN Serial Data Bus -
15	-	-	Not Used
16	5 BK	350	Ground
17	0.35 D-BU	6105	High Speed GMLAN Serial Data +
18-19	-	-	Not Used
20	0.35 L-BU	6106	High Speed GMLAN Serial Data -
21	-	-	Not Used
22	0.35 D-GN	2087	12 Volt Reference
23-25	-	-	Not Used
26	0.5 GY	6031	5-Volt Reference
27	0.5 YE/BK	6032	Low Reference
28-31	-	-	Not Used
32	0.8 RD/BK	1042	Battery Positive Voltage
33	0.5 TN	833	Right Front Wheel Speed Sensor Low Reference
34	0.5 D-GN	872	Right Front Wheel Speed Sensor Signal
35	0.5 BN	6305	Vacuum Pump Relay Control
36	0.5 TN	884	Left Rear Wheel Speed Sensor Signal
37	0.5 OG	885	Left Rear Wheel Speed Sensor Low Reference
38	-	-	Not Used
39	0.5 PU	333	Brake Fluid Level Sensor Signal
40	-	-	Not Used
41	0.5 OG	6030	Brake Booster Vacuum Sensor Signal
42	0.5 WH	883	Right Rear Wheel Speed Sensor Low Reference
43	0.5 BN	882	Right Rear Wheel Speed Sensor Signal
44	-	-	Not Used
45	0.5 L-BU	830	Left Front Wheel Speed Sensor Signal
46	0.5 YE	873	Left Front Wheel Speed Sensor Low Reference
47	-	-	Not Used

Connector Part Information  Harness: Body OEM: 8-1355628-8 Service: 19115598 Description: 47-Way F, Sealed (BK)

Terminal Part Information  Pins: 1, 16 Terminated Lead: Pins: 1 - Pending Terminated Lead: Pins: 16 - 13578926 Release Tool: J-38125-11A Diagnostic Test Probe: J-35616-42 (RD) Terminal/Tray: 7116-4142-02/10 Core/Insulation Crimp: Pins: 1 - A/3 Core/Insulation Crimp: Pins: 16 - D/3 Pins: 32 Terminated Lead: 13576390 Release Tool: J-38125-11A Diagnostic Test Probe: J-35616-42 (RD) Terminal/Tray: 7116-4140-02/10 Core/Insulation Crimp: E/5 Pins: 3, 8, 11-14, 17, 20, 22, 26, 27, 33-37, 39, 41-43, 45, 46 Terminated Lead: Pins 3, 8, 11-14, 17, 20, 22 - 13575815 Terminated Lead: Pins 26, 27, 33-37, 39, 41-43, 45, 46 - 13575814 Release Tool: J-38125-553 Diagnostic Test Probe: J-35616-64B (L-BU) Terminal/Tray: 638551-1/16 Core/Insulation Crimp: Pins 3, 8, 11-14, 17, 20, 22 - J/J Core/Insulation Crimp: Pins 26, 27, 33-37, 39, 41-43, 45, 46 - K/K