LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Canyon 4D Pickup, 3.7 E, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.7L - Repair Instructions >> Repair Instructions >> Camshaft Position Sensor Replacement - Intake >> Installation Procedure

Installation Procedure

  1. Lightly lubricate the O-ring seal with clean engine oil.
    2. Fig 1: View Of Intake Camshaft Sensor
    GM858173Courtesy of GENERAL MOTORS CORP.
  2. Install the intake CMP sensor into the cylinder head.
  3. Add sealer GM P/N 12346004 (Canadian P/N 10953480) to the CMP sensor bolt threads.
    4. CAUTION: Refer to Fastener Caution .
  4. Install the intake CMP sensor bolt.

    Tighten:  Tighten the CMP sensor bolt to 10 N.m (89 lb in).

    5. Fig 2: View Of Intake CMP Sensor And CMP Sensor Electrical Connector
    GM1350719Courtesy of GENERAL MOTORS CORP.
  5. Connect the engine wiring harness electrical connector to the intake CMP sensor.
scientia non olet · About LEMON Manuals