LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Canyon 4D Pickup, 2.9 9 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.9L - Repair Instructions >> Repair Instructions >> Engine Air Cleaner Assembly Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Mass Air Flow (MAF)/intake Air Temperature (IAT) Sensor And Connector
    GM1969052Courtesy of GENERAL MOTORS CORP.
  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  2. Disconnect the engine wiring harness electrical connector (1) from the mass air flow (MAF)/intake air temperature (IAT) sensor (2).
    3. Fig 2: Secondary Air Injection (AIR) Pump Inlet Hose
    GM1969060Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the secondary air injection (AIR) pump inlet hose (1) quick connect fitting from the air cleaner assembly. Refer to Plastic Collar Quick Connect Fitting Service .
    4. Fig 3: Engine Air Cleaner Assembly
    GM1969156Courtesy of GENERAL MOTORS CORP.
  4. Remove the air cleaner bolts (2).
  5. Remove the air cleaner assembly (1) from the vehicle.
scientia non olet · About LEMON Manuals