LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Canyon 4D Pickup, 2.9 9 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.9L - Repair Instructions >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of CKP Sensor And CKP Sensor Electrical Connector
    GM1350744Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the engine wiring harness electrical connector (3) from the crankshaft position (CKP) sensor (1).
    3. Fig 2: View Of Crankshaft Position Sensor
    GM858202Courtesy of GENERAL MOTORS CORP.
  3. Remove the CKP sensor bolt.
  4. Remove the CKP sensor from the engine block.

    Discard the O-ring seals.

scientia non olet · About LEMON Manuals