LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Canyon 4D Pickup, 2.9 9 >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Battery Control Module Replacement (V8)

Generator Battery Control Module Replacement (V8)

Fig 1: View Of Generator Battery Control Module
GM2025245Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the negative battery cable. Refer to Battery Negative Cable Replacement (LH8) .
1 Retainer (Qty: 4)
Tip:  Mark the location of the retainers for installation.
2 Generator Battery Control Module

Procedure

  1. Remove the zip tie from the module.
  2. Remove the tape retaining the module to the negative battery cable and note the location for installation.
  3. Remove the module from the cable.
scientia non olet · About LEMON Manuals