Circuit/System Testing
- Ignition OFF, disconnect the harness connector at the B55 Hood Ajar Switch.
- Ignition OFF, test for less than 8 Ω between the ground circuit terminal C and ground.
- If greater than the specified range, test the ground circuit for an open/high resistance.
- Ignition ON, test for greater 11 V between the signal circuit terminal B and ground.
- If less than the specified range, test the signal circuit for a short to ground or open/high resistance. If the circuit tests normal, replace the B55 Hood Ajar Switch.
- If all circuits test normal, test or replace the K9 Body Control Module.