LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2009 >> Envoy 5.3 M, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 5.3L & 6.0L - Introduction >> Repair Instructions >> Knock Sensor Replacement (Right Side) >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Knock Sensor, Engine Harness & Engine Block - Right Side
    GM1528397Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector (3) from the knock sensor (2).
  2. Remove the knock sensor bolt (1).
  3. Remove the knock sensor (2) from the engine block.
scientia non olet · About LEMON Manuals