LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2009 >> Envoy 5.3 M, 4WD >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Immobilizer System >> Repair Instructions >> Theft Deterrent Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Theft Deterrent Control Module
    GM860152Courtesy of GENERAL MOTORS CORP.
  1. Push the theft deterrent module (2), onto the lock cylinder housing (1).
  2. Install the theft deterrent wiring harness to the steering column harness.
  3. Connect the electrical connector.
  4. Replace the steering column trim covers. Refer to Steering Column Trim Cover Replacement .
  5. Enable the SIR system. Refer to SIR Disabling and Enabling .
  6. Program the new theft control module. Refer to Control Module References for programming and setup information.
scientia non olet · About LEMON Manuals