Removal Procedure

WARNING: This page is about a different car, the 2008 Isuzu Ascender, 2008 GMC Envoy, and 2008 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Install the rear axle support.

Fig 1: View Of Shock Absorber Lower Mounting Bolt

Courtesy of GENERAL MOTORS CORP.

Remove the shock absorber lower mounting bolts.

Fig 2: View Of Rear Coil Spring

Courtesy of GENERAL MOTORS CORP.

NOTE: Do not lower the rear axle so that the upper control arms contact the frame. Damage to the upper control arms will result.

Lower the rear axle.

NOTE: Use care when handling the coil springs in order to avoid chipping or scratching the coating. Damage to the coating will result in premature failure of the coil springs.

Remove the rear coil springs.