Installation Procedure
WARNING: This page is about a different car, the 2008 Isuzu Ascender, 2008 GMC Envoy, and 2008 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Install the splash shield.
- Install the splash shield retaining bolts, same as wheel hub and bearing.
- Install the front hub and bearing assembly. Refer to Front Wheel Hub, Bearing, and Seal Replacement (RWD) or Front Wheel Hub, Bearing, and Seal Replacement (4WD) .
- Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
- Lower the vehicle. Refer to Lifting and Jacking the Vehicle .