LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2009 >> Envoy 4.2 S, 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Interlock System >> Repair Instructions >> Automatic Transmission Shift Lock Control Actuator Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Shift Lock Actuator
    GM1199544Courtesy of GENERAL MOTORS CORP.
  1. In DRIVE position, depress the shift lock actuator button and realign into the shifter lever.
  2. Push lever to NEUTRAL.
    3. CAUTION: Refer to Fastener Caution .
  3. Install the top screw through the lever slot.

    Tighten:  Tighten the actuator screw to 1.65 N.m (15 lb in).

  4. Shift lever to LOW.
  5. Install the screw at the rear of the shifter assembly.

    Tighten:  Tighten the actuator screw to 1.65 N.m (15 lb in).

    6. Fig 2: View Of Shift Lock Actuator Electrical Connector
    GM1341666Courtesy of GENERAL MOTORS CORP.
  6. Connect the electrical connector (3).
    7. Fig 3: Removing/Installing Center Console Assembly
    GM1234306Courtesy of GENERAL MOTORS CORP.
  7. Verify the shift lock actuator functions properly.
  8. Install the console. Refer to Console Replacement .
scientia non olet · About LEMON Manuals