LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2009 >> Envoy 4.2 S, 4WD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Child Restraint Tether Anchor Replacement - Rear No. 1 >> Installation Procedure

Installation Procedure

    Fig 1: Locating Rear Anchors
    GM744907Courtesy of GENERAL MOTORS CORP.
  1. Install the child restraint tether anchor to the floor with the pivot point of the anchor ring indexed toward the front of the vehicle.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the bolt that retains the child restraint tether anchor to the floor panel.

    Tighten:  Tighten the child restraint tether anchor bolt to 35 N.m (26 lb ft).

  3. Close the liftgate.
scientia non olet · About LEMON Manuals