LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2009 >> Canyon 2D Pickup, 5.3 L, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 5.3L - Introduction, Service & Repair >> Repair Instructions >> Fuel Injection Fuel Rail Crossover Tube Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Fuel Injection Fuel Rail Crossover Tube
    GM1898286Courtesy of GENERAL MOTORS CORP.
  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (With CH-48027) Fuel Pressure Relief (Without CH-48027) .
  2. Remove the fuel rail crossover pipe retaining clip screws (1) and retainer clips (3).
  3. Remove the crossover pipe (2) from the left and right hand fuel rails.
  4. Remove and discard the crossover fuel pipe O-ring seals (4).
scientia non olet · About LEMON Manuals