LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2008 >> Yukon Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Cellular System, Entertainment System & Navigation System) >> Repair Instructions >> Video Display Replacement (Third Row)

Video Display Replacement (Third Row)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2009 GMC Yukon XL, 2009 GMC Yukon, 2009 Chevrolet Tahoe, 2009 Chevrolet Suburban, and 2009 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Video Display Assembly & Screws
GM1696497Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Video Display Assembly Screw (Qty: 4)
CAUTION: Refer to Fastener Caution .

Tighten:  2 N.m (18 lb in)


Tip:  Make sure that all 4 washers on the 4 mounting screws are accounted for. If any washers are off the screw and loose, discard to prevent a rattle. The washers were required only for assembly plant installation, and can be used if still on the screw or they can be discarded.
2 Video Display Assembly
Tip: 
  1. Pull down to disengage the retainer clip and remove from the vehicle.
  2. Disconnect the electrical connector.
scientia non olet · About LEMON Manuals