LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2008 >> Yukon Hybrid, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Object Detection System) >> Repair Instructions >> Rear Object Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2009 GMC Yukon XL, 2009 GMC Yukon, 2009 Chevrolet Tahoe, 2009 Chevrolet Suburban, and 2009 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Rear Object Sensor
    GM1699865Courtesy of GENERAL MOTORS CORP.
  1. Remove rear bumper fascia. Refer to Rear Bumper Fascia Replacement (Avalanche, Cadillac EXT) or Rear Bumper Fascia Replacement (All Utility, Cadillac ESV) .
  2. Disconnect electrical from the rear object sensor.
  3. Lift the locking tabs on the housing and remove the rear object sensor.
scientia non olet · About LEMON Manuals