LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2008 >> Acadia SLE, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System >> Diagnostic Information and Procedures >> DTC B0968 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, observe the scan tool Sensor Voltage Feed Output parameter. The reading should be between 8.0 V-9.0 V.
  2. Perform the LED Test, using the scan tool. Observe the operation of the three LEDs. All three LEDs should illuminate.
scientia non olet · About LEMON Manuals