LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2007 >> Yukon Denali >> Repair and Diagnosis >> External Pages >> Different car >> Section 687 (Power Outlets) >> Repair Instructions >> 120 Volt Receptacle Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 GMC Sierra, 2006 GMC Cab & Chassis Sierra, 2006 Chevrolet Silverado, and 2006 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Receptacle Outlet
    GM1448672Courtesy of GENERAL MOTORS CORP.
  1. Connect the receptacle electrical connections.
  2. Install the receptacle outlet (3) to the receptacle box (1).
    3. NOTE: Refer to Fastener Notice .
  3. Install the receptacle outlet screws (2).

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  4. Connect the ESB. Refer to Energy Storage Box (ESB) Service Disconnect/Connect (5.3L Engine w/RPO HP2) .
scientia non olet · About LEMON Manuals