LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2007 >> Yukon Denali >> Repair and Diagnosis >> External Pages >> Different car >> Section 1848 (Front Suspension System) >> Repair Instructions >> Upper Control Arm Replacement (2500) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the upper control arm.
    2. Fig 1: Upper Control Arm
    GM793281Courtesy of GENERAL MOTORS CORP.
    CAUTION:

    Refer to Fastener Caution .

  2. Install the upper control arm bolts and tighten to 190 N.m (140 lb ft).
  3. Connect the upper control arm to the steering knuckle.
  4. Install the new nut to the upper ball joint stud and tighten to 50 N.m (39 lb ft).
  5. Install the retaining bolts for the brake hose and wheel speed sensor brackets and tighten to 9 N.m (80 lb in).
  6. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  7. Lower the vehicle.
  8. Verify the wheel alignment. Refer to Wheel Alignment Specifications .
scientia non olet · About LEMON Manuals