LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2007 >> Sierra Classic 1500 HD, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Power Takeoff >> Power Take-Off >> Repair Instructions >> Power Take-Off Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of I/P Switch Housing
    GM884837Courtesy of GENERAL MOTORS CORP.
  1. Install the PTO switch to the housing
  2. Connect the wire connector to the switch.
  3. Install the switch housing to the I/P till it clicks into place.
  4. Install the I/P cluster bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .
scientia non olet · About LEMON Manuals