LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2007 >> Sierra Classic 1500 HD, 4WD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Cable Replacement >> Removal Procedure

Removal Procedure

CAUTION: Refer to Battery Disconnect Caution .
    Fig 1: View Of Generator Cable & Nut
    GM395686Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Auxiliary Battery)  or Battery Negative Cable Disconnection and Connection (Single Battery) .
  2. If necessary, remove the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement (4.8L, 5.3L, and 6.0L - RPO LQ4) or Upper Intake Manifold Sight Shield Replacement (6.0L - RPO LQ9) .
  3. Remove the generator cable from the generator, perform the following:
    1. Reposition the boot to expose the stud.
    2. Remove the generator cable nut.
    3. Remove the generator cable from the stud.
    4. Fig 2: View Of Battery Cables At Junction Block
    GM662521Courtesy of GENERAL MOTORS CORP.
  4. Open the positive cable junction block.
  5. Remove the generator cable nut.
  6. Remove the generator cable (2) from the junction block.
scientia non olet · About LEMON Manuals