LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2007 >> Savana Special 4.8 V >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System And Remote Functions >> Repair Instructions >> Remote Control Door Lock Receiver Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Disconnecting Electrical Connector From Door Lock Receiver
    GM871215Courtesy of GENERAL MOTORS CORP.
  1. Perform the following to install the door lock receiver (1) to the door lock receiver bracket.

    Slide the tab on door lock receiver (1) into the door lock receiver bracket and snap into place to secure.

  2. Connect the electrical connector (1) to the door lock receiver (2).
  3. Install the I/P trim panel. Refer to Instrument Panel Upper Trim Pad Replacement .
  4. Refer to Control Module References for programming and setup information.
scientia non olet · About LEMON Manuals