Installation Procedure
WARNING: This page is about a different car, the 2006 Isuzu Ascender, 2006 GMC Envoy XL, 2006 GMC Envoy, 2006 Chevrolet TrailBlazer, and 2006 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
- If installation of the mounting bracket is required, install the mounting bracket to the overhead console.
- Install the 2 OnStar® microphone retaining screws.
Tighten: Tighten the screws to 0.8 N.m (7 lb in).
- Install the microphone to the mounting bracket ensuring the quick release tab (1) is fully seated.
- Connect the electrical connector to the OnStar® microphone (1).
- Install the overhead console. Refer to Console Replacement - Overhead in Interior Trim.
NOTE:
Refer to Fastener Notice in Cautions and Notices.