LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2007 >> Canyon 4D Pickup, 2.9 9 >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Immobilizer System >> Diagnostic Information and Procedures >> Scan Tool Data List

Scan Tool Data List

Body Control Module (BCM)

Scan Tool Parameter Data List Units Displayed Typical Data Value
Operating Conditions: Ignition ON, Engine OFF
Auto Learn Timer Security Data Seconds 0-600
Content Theft State Security Data Off/Pre-arm/Armed/Pre-alarm/Alarm/Tamper Off
Driver Door Ajar Switch Inputs Door Closed/Door Ajar Door Closed
Passnager Door Ajar Switch Inputs Door Closed/Door Ajar Door Closed
Passlock State Security Data Ignition Off/Normal Decision/Learn Passlock/Tamper/Monitor Passlock/Fail Enable/ Fail Enable Dec/Seedkey Lrn Pend/Seedkey Learn/Auto Learn Pend/Auto Learn Normal Decision
Seed and Key Timer Security Data Seconds 0-600
Tamper Timer Security Data Seconds 0-600
VTD Fuel Diasble Security Data Active/Inactive Inactive
Powertrain Control Module (PCM)

Scan Tool Parameter Data List Units Displayed Typical Data Value
Operating Conditions: Ignition ON, Engine OFF
PCM/VCM in VTD Fail Enable Engine Data 3 Yes/No No
VTD Auto. Learn Timer Engine Data 3 Active/Inactive Inactive
VTD Fuel Disable Engine Data 3 Acitve/Inactive Inactive
VTD Fuel Disable Until Ign. Off Engine Data 3 Yes/No No
VTD Password Engine Data 3 OK/Incorrect OK