LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2007 >> Acadia SLT, FWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Water Pump Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Water Pump And Components
    GM1412162Courtesy of GENERAL MOTORS CORP.
  1. Install a NEW water pump seal.
  2. Install the water pump.
    NOTE: Refer to Fastener Notice .
  3. Install the water pump bolts.

    Tighten:  Tighten the water pump bolts to 10 N.m (89 lb in).

    4. Fig 2: Locating Water Pump Pulley And Bolts
    GM1412160Courtesy of GENERAL MOTORS CORP.
  4. Install the water pump pulley and the water pump pulley bolts.
    5. Fig 3: Identifying Special Tools - EN 46104
    GM1412158Courtesy of GENERAL MOTORS CORP.
  5. Use the EN 46104  in order to retain the water pump pulley.
  6. Install the water pump pulley bolts.

    Tighten:  Tighten the water pump pulley bolts to 10 N.m (89 lb in).

  7. Install the right engine strut mount. Refer to ENGINE MOUNT STRUT REPLACEMENT - RIGHT SIDE .
  8. Install the right engine mount strut bracket. Refer to ENGINE MOUNT STRUT BRACKET REPLACEMENT - RIGHT SIDE .
  9. Install the drive belt. Refer to Drive Belt Replacement .
  10. Fill the cooling system. Refer to Draining and Filling Cooling System (Static Fill)  or Draining and Filling Cooling System (Vac N Fill) .
scientia non olet · About LEMON Manuals