LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2007 >> Acadia SLT, AWD >> Repair and Diagnosis >> Steering >> Steering Wheel & Steering Column >> Repair Instructions >> Intermediate Steering Shaft Boot Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Intermediate Steering Shaft Boot
    GM1856325Courtesy of GENERAL MOTORS CORP.
  1. Install the intermediate steering shaft boot (1).
    NOTE: Refer to Fastener Notice .
    2. Fig 2: Identifying Intermediate Steering Shaft Bolt
    GM1853880Courtesy of GENERAL MOTORS CORP.
  2. Install the intermediate steering shaft to the power steering gear and install the intermediate steering shaft bolt (1).

    Tighten:  Tighten the bolt to 22 N.m (16 lb ft).

    IMPORTANT: Install intermediate steering shaft boot in the exact position it came out.
  3. Install the intermediate steering shaft boot to the power steering gear and the intermediate steering shaft upper seal.
  4. Install the left front tire/wheel assembly. Refer to Tire and Wheel Removal and Installation .
scientia non olet · About LEMON Manuals