Power Steering Pump Pulley Replacement
Courtesy of GENERAL MOTORS CORP. Power Steering Pump Pulley Replacement
| Callout |
Component Name |
Preliminary Procedure:
Remove the power steering pump. Refer to Power Steering Pump Replacement . |
| 1 |
Power Steering Pump Pulley Procedure
- Use remover J 25034-C
to remove the power steering pump pulley.
- Use installer J 25033-C
to install the power steering pump pulley.
- Ensure the axial tolerance of the power steering pulley on the shaft is within 0.25 mm (0.010 in).
Special Tools
- J 25033-C
Pulley Installer
- J 25034-C
Pulley Remover
|