Rear Camber Adjustment

WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools

J 45845 Caster and Camber Adjusting Tool. See Special Tools .
J-45845-10 Caster and Camber Adjusting Rod. See Special Tools .

Fig 1: Caster & Camber Adjusting Tool

Courtesy of GENERAL MOTORS CORP.

Install the J 45845 or the J-45845-10 to the lower control arm and the frame. See Special Tools .
Loosen the lower control arm to frame bolt.

CAUTION: Refer to Fastener Caution .

Adjust the camber angle by turning the turnbuckle on J 45845 or the J-45845-10 until the specifications have been met. See Special Tools .
Tighten: Tighten the bolt to 135 N.m (96 lb ft).
Verify that the camber is still with specifications. Refer to Wheel Alignment Specifications .
Adjust the rear toe. Refer to Rear Toe Adjustment .