Removal Procedure
WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
- Run the window to the full closed position.
- Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
- Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .
- Tape the window in the closed position.
- Loosen the window clamp nuts 4 revolutions.
- Connect the door trim panel electrical connector.
- Using the power window switch, lower the window regulator to separate the window from the clamps.
- Remove the tape.
- Remove the window by tilting the window forward then pulling the window up and out of the door.
WARNING:
Refer to Glass and Sheet Metal Handling Warning
.
WARNING:
Refer to Express Window Down Warning
.