Amplifier Interface
WARNING: This page is about a different car, the 2008 Saturn Outlook, 2008 GMC Acadia, and 2008 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
A discrete switched 12-volt output is used to control the power-state of the amplifier. To respond quickly to audio input and control signals, the amplifier is ON in all vehicle power modes except OFF and CRANK Request. However, when the amplifier is deactivated it still must allow chime functionality. The internal amplifier bridges are fully powered and unmuted when the amplifier receives the switched 12-volt input
The radio provides a remote radio control signal to control overall muting of the amplifier. The amplifier receives PWM signals on the circuit at varying duty cycle percentages for controlling the muted and unmuted functions of the amplifier.
The function table below shows the possible amplifier mute functions.
| % Duty Cycle Out | Function |
|---|---|
| 0% (Vlow Vdc) | FOUR_CHANNEL_UNMUTE |
| 50% | REAR_MUTE (input must be 2-channel) |
| 100% (Vhigh Vdc) | ALL_MUTE |