Test Description
WARNING: This page is about a different car, the 2007 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.
The numbers below refer to the step numbers on the diagnostic table.
- 2: Clear all DTCs and cycle the ignition to verify that the DTC did not falsely set.
- 3: Clear all DTCs after the repair procedure is complete.
DTC B1001
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle in Vehicle DTC Information |
| 2 |
|
Go to Step 3 | System OK |
| 3 | Replace the digital radio receiver. Refer to Control Module References
in Computer/Integrating Systems. Did you complete the replacement? |
System OK | - |