LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2007 >> Acadia SLT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1243 (Engine Controls/Fuel - 6.2L - Repair Instructions) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2013 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Fuel Tank Pressure Sensor
    GM1558061Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    There are alignment features on the canister, however, there are no locking tabs on the sensor/canister. The sensor is held into the canister by the tight fit of the multi-lip seal.

  1. Install the fuel tank pressure sensor to the EVAP canister until fully seated.
    2. Fig 2: View Of Fuel Tank Pressure Sensor Electrical Connector
    GM1558059Courtesy of GENERAL MOTORS COMPANY
  2. Connect the fuel tank pressure sensor electrical connector (1).
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals