Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Remove the center I/P air vents. Refer to INSTRUMENT PANEL CENTER TRIM PANEL REPLACEMENT .
Remove the HVAC programer/ashtray assembly. Refer to HVAC Control Module Replacement .

Fig 1: View Of Radio

Courtesy of GENERAL MOTORS CORP.

Remove the 4 10 mm screws securing the radio to the I/P retainer.
Pull out the radio assembly.
Disconnect the electrical connectors.
Remove the radio from the vehicle.