Circuit/System Verification
WARNING: This page is about a different car, the 2008 Saturn Outlook, 2008 GMC Acadia, and 2008 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Inspect the complete steering column wiring harness for chafing as the harness routes along and below the steering column. The wires in the steering column harness may be chafed or cut on the tilt telescope mechanism edges.
- Verify DTC C0710 and/or DTC U2142 is not set.
- If either or both DTCs are set, refer DTC U2105-U2199 .
- Operate the vehicle within the Conditions for Running the DTC. Verify the DTC does not reset.
- If the DTC resets, refer to Diagnostic Aids .